I’m a big fan of Satechi hardware. The company makes all sorts of docks and peripherals and storage devices that look and feel like Apple hardware.
The latest in the Satechi line is a new USB-C NVME and SATA SSD enclosure.
The idea is simple. You buy the solid-state drive (SSD) enclosure, add a PCIe or NMVe M.2 drive, and away you go. There’s even a USB-C to USB-C included.
No screwdrivers or tools needed to assemble.
The enclosure is made of aluminum and is tough yet very stylish. There’s a USB-C port on one end, and on the other a switch to pop the internals out from the drive to fit the drive.
The fit and finish of this Satechi enclosure are excellent. Image: Adrian Kingsley-Hughes
Fitting a drive is easy. You buy the drive you want (more on that in a moment), peel the protective coating from the thermal pad, attach that to the back of the drive, fit it into the slot, and then hold it in place with the rubber retainer provided.
Fitting the SSD into the enclosure. Image: Adrian Kingsley-Hughes
Then you slot the drive holder back into the enclosure.
Closing up the enclosure. Image: Adrian Kingsley-Hughes
Done. No tools required.
The Satechi SSD enclosure can take both PCIe and NMVe M.2 drives in 2242/2260/2280 sizes without fitted heatsinks.
Also: Is your Mac’s SSD about to die? How to find out
Here are a few SSDs I recommend:
Western Digital 1TB WD Blue SN570 NVMe – $78.99
WD BLACK 2TB SN770 NVMe – $198
Lexar Professional 1TB NM800 PRO – $169.99
Lexar NM620 512GB M.2 – $49.99
Performance is good. You’ll see in the image below that my drive hit read and write speeds of 890MBps and 950 MBps using a Lexar Professional NM800 drive.
Some SSD enclosures get hot when in use, but I pushed this drive hard and while it got a bit warm, it was nothing to worry about, and nothing that would stop you from picking it up and putting into a pocket.
The only downside to the Satechi SSD enclosure is that I found that it was possible to push the drive holder into the enclosure from the wrong end and jam it in.
That wasn’t a huge problem because I could use a long screwdriver to press the switch on the end to eject it, but it is something to be aware of.
This is the only time I needed to use a separate tool with this enclosure.
Stay connected with us on social media platform for instant update click here to join our Twitter, & Facebook
We are now on Telegram. Click here to join our channel (@TechiUpdate) and stay updated with the latest Technology headlines.
For all the latest Technology News Click Here